AMI NiteHAWK Información técnica descargar pdf (Pagina 46)

Section 3 – Operator Screens

40 21822706

3.2 Credit Management

The Credit Management screen provides access

to add or clear credits, enable/disable the auto-

restoration of credits, enable/disable remote

credits, and enable/set the credit pool.

The credits value can be changed by touching the text box under Credits. A numeric keypad will pop

up. Touch Clear to clear the current value, and then use the keypad to set the value from 0 to 999.

To save your changes, touch Update on the keypad.

Auto Restore Credits is enabled by default and shows a check mark in the box. This will allow the

jukebox to retain any remaining credits when it is turned off. Touch the box to remove the check

mark and turn this option “off”.

Remote Credits gives the location access to free credits that are accessible via the VCU and/or the

IR Remote Control. Touch the check box next to Enable Remote Credits to allow this feature.

Note: The IR Remote Setup screen (Hardware Setup –> IR Remote Setup) and the VCU

Setup Screen (Hardware Setup –> VCU Setup –> VCU tabs 1-4) both contain a check box

to Add Credits. If those are not also checked, credits cannot be added from the IR

Remote and/or VCU even if the Enable Remote Credits box is checked on this page.

There are two modes for Remote Credits, unlimited and Credit Pool. In unlimited mode, there are

no limits on the number of free credits that can be granted. In the Credit Pool mode, free credits

are limited to a specified number of credits which can be granted at three different times during the

day. Each day credit pool amounts are refreshed and unused credit pool credits are not carried over to the next time period.

• To set unlimited free credits

, ensure there is a check mark in the check box next to Enable Remote Credits and

the check box under Enable Credit Pool is unchecked. Touch either check box to turn the check marks on and off.

• To use the Credit Pool,

ensure there is a check mark in both the Enable Remote Credits check box and the

Enable Credit Pool check box. Touch the text box after “Grant” for the pop-up numeric keypad that allows you to

set the credit pool value for each of the three free credit periods. To disable one or two of the free credit periods,

enter 0 on the keypad. Touch the time text box and use the pop-up key pad to set the times of the day when the

free credit(s) will be made available. Unused credits are not carried over to the next time period.

Touch the Save button to save your changes.

Touch the Cancel button to undo your changes and exit the screen.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 86 87

Sin comentarios

AMI NiteHAWK Información técnica Pagina 46